WELCOME TO YASAKA SEIKI Co.,Ltd.

FEATURE

Our scissors use the stainless steel special cutlery steel manufactured based on the raw material iron with high purity.
The character of the iron is excellent in hardness, wear and abrasion resistance, and the resistance to corrosion.
The scissor blades are sharpened by our unique method that is the first of its kind.
Blades are hardened and then annealed in a complete vacuum, with the blades
sharpened to a point in finishing the scissors.
After vacuum annealing and sub-zero treatment is provided by our own special unique process.

“440C”
440c of our company is made by Hitachi Metals
Practical hardness is a little low though it excels in corrosion resistance because a lot of chrome is contained.
However, the feeling in which the hair is cut is soft.

“ATS314”
ATS314 of our company is made by Hitachi Metals
ATS314 is not steel for a usual blade.
ATS314 is a special material that the element was adjusted because of the hair cutting scissors.
Cobalt etc. are added and practicable hardness has been improved.
The matrix is strengthened, and the effect of the carbide of the dropout prevention has been improved further.
The period when the blade cuts well lasts long.

“VG10”
VG10 of our company is made by Takefu Special Steel.
VG10 is special cutlery steel of high purity that makes the Swedish sponge iron a raw material.
Cobalt etc. are added and practicable hardness has been improved.
The matrix is strengthened, and the effect of the carbide of the dropout prevention has been improved further.
The period when the blade cuts well lasts long.

PRECAUTIONS

To use scissors for a long time:
•DO NOT loosen the fulcrum screw more than necessary.
When the screw loosens, open the scissor, then close one scissor using only the weight of the scissors without applying any force.
The optimal gap between the hafts is approximately 5mm. Loosen the screw and adjust the gap when it is wide and scissors feel heavy.
•Handle the scissors with care when cutting hair.
The scissor blades may crack if scissors are dropped on the floor or tossed roughly onto a table.
Remove permanent wave solution, water or dirt after using the scissors.
Corrosion may greatly reduce scissor life.
The scissor life itself shortens and blade sharpening will become impossible
if scissors with dull blades are used to cut hair. Sharpen the blades immediately when they become dull.

YASAKA SEIKI CO.LTD.
Address : 2140-1 Takayama-Cho Ikoma Nara 630-0101 Japan
Phone : +81-743-78-1956 EMail : info@yasakaseiki.co.jp

2 types of screws are available for some products.
Indication is given when screws are selectable.
nob.jpgTension Adjustable Screw | Precision flat Screw